OEM/ODM Manufacturer China 1/10G LC SFP Module SM MM Transceiver

Abubuwan da ke da wadatar abubuwan gudanarwa na ayyukan gudanarwa da samfurin sabis ɗaya zuwa ɗaya suna yin babban mahimmancin sadarwar kasuwanci da sauƙin fahimtar abubuwan da kuke tsammanin OEM / ODM Manufacturer China 1/10G LC SFP Module SM MM Transceiver, A halin yanzu, sunan kasuwanci yana da ƙari fiye da nau'ikan kayayyaki 4000 kuma sun sami matsayi mai kyau da babban hannun jari a kasuwannin cikin gida da waje.
Kyawawan gogewar gudanar da ayyuka masu wadata da samfurin sabis ɗaya zuwa ɗaya suna ba da mahimmancin sadarwar kasuwanci da sauƙin fahimtar abubuwan da kuke tsammanin don1.25G SFP Module, 10G SFP Module, China SFP Module, Yanayin Single da Multimode, Yanzu muna da suna mai kyau ga barga ingancin kayayyakin, da samu da abokan ciniki a gida da kuma kasashen waje.Kamfaninmu zai jagoranci ta hanyar ra'ayin "Tsaya a Kasuwannin Gida, Tafiya zuwa Kasuwan Duniya".Muna fatan cewa za mu iya yin kasuwanci tare da abokan ciniki a gida da waje.Muna sa ran hadin kai na gaskiya da ci gaba tare!

Siffofin Samfur

● Yana goyan bayan 1.25Gbps/1.0625Gbps bit bit

● Duplex LC connector

● Zafin sawun SFP mai zafi

● 1310nm FP Laser watsawa da PIN-photo-gane

● Ana amfani da haɗin 10Km SMF

● Ƙarfin wutar lantarki, <0.8W

● Sadarwar Sadarwar Dijital Diagnostic Monitor

● Mai yarda da SFP MSA da SFF-8472

● Ƙananan EMI da kyakkyawar kariya ta ESD

● Yanayin aiki:

Kasuwanci: 0 zuwa 70 ° C

Masana'antu: -40 zuwa 85 °C

Aikace-aikace

● Gigabit Ethernet

● Fiber Channel

● Canja zuwa Canja wurin dubawa

● Canja wurin aikace-aikacen jirgin baya

● Mai ba da hanya tsakanin hanyoyin sadarwa/Server

● Sauran tsarin watsawa na gani

Zane na Aiki

Cikakkar Matsakaicin Mahimman Kima

Lura: Danniya fiye da matsakaicin madaidaicin ƙima zai iya haifar da lalacewa ta dindindin ga mai ɗaukar hoto.

Babban Halayen Aiki

Halayen Lantarki (TOP(C) = 0 zuwa 70 ℃, TOP(I) = -40 zuwa 85 ℃, VCC = 3.13 zuwa 3.47V)

Bayanan kula:

1. TD +/- suna ciki AC tare da 100Ω bambancin ƙarewa a cikin tsarin.

2. Tx Fault da Rx LOS sune buɗaɗɗen kayan tattarawa, waɗanda yakamata a ja su tare da 4.7k zuwa 10kΩ resistors a kan hukumar gudanarwa.Juya ƙarfin lantarki tsakanin 2.0V da Vcc+0.3V.

3. RD +/- abubuwan da aka fitar suna cikin AC tare da juna, kuma ya kamata a ƙare tare da 100Ω (daban-daban) a mai amfani SERDES.

Halayen gani (TOP(C) = 0 zuwa 70 ℃, TOP(I) = -40 zuwa 85 ℃,VCC = 3.13 zuwa 3.47V)

Bayanan kula:

1. An auna a 1.25Gb/s tare da PRBS 2 2^{23 – 1}Tsarin gwajin NRZ.

2. Ba a tace ba, an auna shi da PRBS2^{23 – 1}samfurin gwaji @1.25Gbps

3. An auna a 1.25Gb/s tare da PRBS 2^{23 – 1}Tsarin gwajin NRZ don BER <1×10^-12

Ma'anar Pin Da Ayyuka

Bayanan kula:

1. Lokacin da girma, wannan fitarwa yana nuna kuskuren laser na wani nau'i.Ƙananan yana nuna aiki na al'ada.Kuma ya kamata a ja sama da 4.7 - 10KΩ resistor a kan hukumar gudanarwa.

2. TX disable shine shigarwar da ake amfani da ita don rufe kayan aikin gani na watsawa.An ja sama a cikin module tare da 4.7 - 10KΩ resistor.Jihohinta su ne:

Ƙananan (0 - 0.8V): Mai watsawa a kan (> 0.8, <2.0V): Ba a bayyana ba

Maɗaukaki (2.0V~Vcc+0.3V): An kashe Mai watsawa Buɗe: An kashe mai watsawa

3. Mod-Def 0,1,2.Waɗannan su ne fil ɗin ma'anar module.Ya kamata a ja da su tare da 4.7K - 10KΩ resistor akan allon mai masaukin baki.Ƙarfin cirewa zai kasance tsakanin 2.0V~Vcc+0.3V.

Mod-Def 0 ya kasance ƙasa ta tsarin don nuna cewa ƙirar tana nan

Mod-Def 1 shine layin agogo na serial interface na waya guda biyu don ID na serial

Mod-Def 2 shine layin bayanai na hanyar sadarwa ta waya guda biyu don serial ID

4. Lokacin da girma, wannan fitarwa yana nuna asarar sigina (LOS).Ƙananan yana nuna aiki na al'ada.

5. RD +/-: Waɗannan su ne nau'ikan nau'ikan masu karɓa.Su AC ne haɗe-haɗe 100Ω bambancin layukan da ya kamata a ƙare tare da 100Ω (daban-daban) a mai amfani SERDES.Ana yin haɗin haɗin AC a cikin ƙirar kuma don haka ba a buƙata a kan hukumar gudanarwa.

6. TD +/-: Waɗannan su ne nau'ikan abubuwan watsawa daban-daban.An haɗa su AC-haɗe-haɗe, layukan daban-daban tare da ƙarewar bambancin 100Ω a cikin tsarin.Ana yin haɗin haɗin AC a cikin ƙirar kuma don haka ba a buƙata a kan hukumar gudanarwa.

Ƙayyadaddun Bincike na Dijital

Ana iya amfani da masu wucewa a cikin tsarin runduna waɗanda ke buƙatar ko dai na ciki ko na waje da aka ƙididdige ƙididdigar dijital.

Bayanan kula:

1.Lokacin da yanayin aiki = 0 ~ 70 ºC, kewayon zai zama min = -5, Max = +75

2. Daidaiton Tx bias current shine 10% na ainihin halin yanzu daga direban laser zuwa laser.

3. Ciki / na waje daidaitawa.

Da'irar Interface Na Musamman

Girman Kunshin